• BM06K-BS06K-focus-lens-and-collimating-lens-with-holder
  • BM06K-BS06K-focus-lens-and-collimating-lens-with-holde
1 2

UMAK laser

Raytools BM06K Laser Focus Lens & Collimation Lens with Holder

Raytools BM06K Laser Focus Lens & Collimation Lens with Holder

$250.00
$250.00
Em promoção Esgotado
Envio calculado na finalização da compra.
Model

Brand: RayTools BM06K and BS06K

Material: High Purity Fused silica

Diameter:  D37mm

Focal Length: 100mm, 150mm, 200mm

Shape: Focus Lens and Collimating Lens with holder

Wavelength: 1064nm

Applicable Brand: Raytools

Double-sided AR coating process

Total Absorption :< 30PPM, Transmission :> 99.8%.

Our fiber laser collimation lens and focus lens for RayTools BM06k cutting heads is designed to maintain accurate laser beam alignment and stable optical performance.

Using premium optical materials and precision coating technology, this lens provides excellent transmission efficiency and reliable operation in demanding industrial laser applications.

Ver detalhes completos

Above information only for Raytools brand laser cutting head and all specification as reference only. Please contact our salesman before order to guarantee you will get the correct model.

Check the label information of your laser head first to confirm its model and focus lens specification. Than choose the correct lens for your laser head

Package Details

  • All laser focus lens and collimating lens have protective film than put inside of plastic bag.
  • Out package use box and have foam inside of box.
  • Every window is packaged individually

Shipping & Delivery

  • Delivery Time: 48 hours after payment.
  • Worldwide Shipping
  • UPS/ FEDEX/ DHL/ Air Freight etc available.

FAQ

  • Q1: When should we replace focus lens and collimating lens?

    When the cutting surface becomes rough or won't penetrate. you may need change focus lens.

  • Q2: Which focal length lens should I choose – 100mm, 125mm, or 150mm?

    You need change your laer head label to confirm which focal length you are using.

    Pls inquiry engineer first if you want to use different focal length to avoid unnecessary damage.

  • Q3: Why do your lenses cost more than other suppliers on Alibaba?

    Good question. The price difference mainly comes from the coating quality and substrate material.

    We use high grade Fused Silica, double-sided AR coating process, transmission > 99.8%

  • Q4: How should I install and clean the lens to avoid damaging it?

    ✅ DOs:

    • Wear nitrile gloves – skin oils will burn into the coating
    • Use lens tissue + reagent-grade acetone or ethanol (≥99.5%)
    • Wipe in one direction (not back-and-forth) with light pressure
    • Check the O-ring seal when re-installing – a damaged seal ruins the lens faster than anything else
    • Mark the installation direction – the coated side usually faces the laser source (check your old lens or manual)

    ❌ DON'Ts:

    • Never touch the optical surface with bare fingers
    • Never use compressed air to blow dust off – it may contain moisture/oil
    • Never reuse cleaning tissue
    • Never over-tighten the retaining ring – finger-tight + ¼ turn is enough

    🚨 Warning: Most lens failures are caused by improper cleaning or installation, not by the lens quality itself. We include a QR code in every package – scan it to watch a 2-minute installation video.

Inquiry